How to Vacuum Coleman Pool with a Sand Filter: A Step by Step Guide

Vacuuming a pool is a standard procedure for keeping your swimming pool clean and removing unwanted dirt. That is what you must do to keep your pool in good working order and safe to use. The process of cleaning the pool, however, will differ depending on the method used.

There are several methods for vacuuming a pool to remove contaminants and keep the pool environment safe. In this case, we will look at how to vacuum a Coleman pool with a sand filter correctly.

This article will walk you through the process of vacuuming your Coleman pool with a sand filter. Continue reading to find out more and get a detailed breakdown of how vacuuming a pool with a sand filter the proper way.

How to Vacuum Coleman Pool with a Sand Filter

In this post we will cover:

  1. How to Vacuum Coleman Pool with Sand Filter
  2. Are Coleman pools good quality?
  3. What are Coleman pools made of?
  4. What kind of filter does a Coleman pool use?
  5. How do you maintain an above-ground Coleman pool?

How to Vacuum Coleman Pool with Sand Filter

These are the steps to follow for cleaning your Coleman pool that uses a sand filter:

Step 1: Remove any large debris or leaves from your pool before you begin vacuuming. The large debris or leaves should be removed using a scope net since they may block your pool vacuum’s head or hose pipe.

Ensure that you brush the sides of your pool so that the dirt can fall on the bottom of the pool. Then leave the pool for an hour to allow fine dirt to settle so that when you vacuum, your pool vacuum will be able to pick them up.

Step 2: Assemble your vacuum and put it together by attaching the vacuum head to the hose pipe and telescopic pole. To prevent the pole from sliding and coming off during usage, lock it tightly into position.

Step 3: Immerse the vacuum assembly into the water, comprising the hose, head, and extension pole, until the vacuum head reaches the bottom of your pool. Lean the extension pole against the side of the pool after locking it into the right position.

The vacuum head should touch the bottom of the pool while the pole is under a tight lock.

Step 4: Flood the hose pipe with water to remove air from it, which may lead to suction loss. Any trapped air in the hose pipe may be drawn into the pump, creating an air block. If you want to fill the hose with water quickly, hold it next to the return outlet.

Step 5: Attach the hose pipe to the dedicated suction port or skimmer. Attach the hose to the pool’s dedicated suction port if it has one. If your pool does not have one, attach it to the skimmer.

Most skimmers require you to remove the skimmer basket for you to be able to attach the hose. The port for the hose is located at the bottom of the skimmer. Move the multiport valve to the filter setting by pushing down on the handle.

Step 6: Vacuum the pool by moving the head of the vacuum slowly and deliberately across the sides and bottom of the pool using the telescopic pole. The vacuuming should be done as gently as possible to prevent disturbing the dirt at the bottom of the pool.

Any disturbed dirt will go into suspension in the water and will settle at the bottom, causing you to vacuum again. Start vacuuming in one corner, then along the side in the direction you intend to work, and then vacuum from the sides to the middle of the pool.

Step 7: Unplug the hose from the dedicated suction support or skimmer. Then dismantle the vacuum equipment after disconnecting. Then turn off the pump.

Step 8: Backwash to reverse the flow of water and expel the dirty water through a waste line into the drain or ground. Ensure that you turn the filter valve into the backwash position.

Also, turn on the pump and backwash for about two minutes, or until the water in the filter’s sight glass runs clear. If your pool has little dirt, backwashing the filter may not be necessary.

Step 9: Turn off the pump and turn the filter valve to the rinse position and rinse it. Then turn on the pump and run the rinse process for a minute. Turn the pump off again.

Step 10: Clean the filter. Close the skimmer valve, and then empty and clean the filter skimmer basket and hair catcher. Reopen the skimmer valve when you’re finished. Lastly, reset the filter valve to filter and turn on the pump.


Conclusion

Regular vacuuming of your pool is essential because it gets rid of contaminants that sink to the bottom and those that remain suspended on the surface. For your Coleman pool, you can easily vacuum it with a sand filter using the procedures that we have outlined above.

The process is a no-brainer and you can easily handle it on your own. Our procedure will assist you in maintaining a healthy and hygienic pool without involving professional pool cleaners. All you require is a vacuum assembly that is best suited for the cleaning task.


FAQs

Are Coleman pools good quality?

Coleman is one of the leading brands when it comes to the manufacture of above-ground pools. When it comes to performance, the pool can last for years since it is durable. The designs are straightforward, and setting up and maintaining the Coleman pools is easy.

Coleman pools mostly use a cartridge filter while others use a sand filter. The cartridge filter needs regular maintenance and replacement. However, they do an excellent job when it comes to cleaning small-sized pools.

Coleman pools have a multitude of designs that you can choose from. The above-ground pools come with a ladder, but the ladder is usually a low-grade one because this is a skit. The ladder works, but it will need replacement in the long run.

In general, Coleman pools come with a ladder and pump. The pools are available in several options; there are different sizes to choose from, and they are easy to install and operate. The downside is that rust can be an issue with some of the Coleman pools long-term.


What are Coleman pools made of?

Coleman pools are made with various durable materials. However, here we are going to focus on the Coleman Power Steel Swim Vista Series Pool Set as an example to show the type of material that Coleman pools are made of.

The swim vista is the second generation of pools made with built-in re-enforced potholes. The swim vista portholes allow parents to keep an eye on the children while in the pool. Each porthole has been strengthened and enhanced for a tight, leak-free seal.

The Coleman pool does not need any tools to set it up and it has a durable construction that is built to last. It has rust and corrosion-resistant steel frame that is sealed with Coleman’s seal and lock system for a secure, sturdy, and simple frame connection.

The inner part is made with Coleman’s ultra-durable, puncture-resistant Tritech material that offers a sturdy and strong pool. The pool has a natural-looking rattan wicker print. The pool comes with a filter pump that keeps the pool water clean, a safety ladder, and a pool cover.


What kind of filter does a Coleman pool use?

Most Coleman pools use a cartridge filter, which is a replacement swimming pool filter. The filter cartridge can sift out dirt and debris, allowing the pump to refill the pool with clean water.

The filter should be replaced every few weeks to enable your pool to obtain the highest standards of hygiene and cleanliness. When the pool’s filter is well maintained, your pool will stay fresh and attractive, making it more enjoyable.

If you want your Coleman pump to perform at its best, get the Coleman filter cartridge type IV, type B. The filter is suitable for filter pumps that run 2,100 and 2,500 gallons of water per hour. It is easy to clean, sifts out debris and dirt with your pump, and has a one-year warranty.


What pool vacuum setting do you use for vacuuming a pool with a sand filter?

To vacuum your pool with a sand filter, you need to set up your vacuum the correct way. That means that you have to attach the vacuum head to the ends of the telescopic pole. Secondly, attach the hose to the vacuum.

Thirdly, you have to attach the skim-vac to the other end of the hose, but you can skip this step if your pool is a doughty one. Fourth, turn off the pump and push the vacuum set up, including the hose and pole, into your pool to release the air from the hose.

If your pool is a doughty one, the skimmer lid should be pushed down into the skimmer. The fifth step involves opening the skimmer lid and placing the skim-vac over the skimmer basket or skimmer.

Avoid putting the hose into the skimmer hole directly because it will damage the plumbing of your pool over time.


How do you maintain an above-ground Coleman pool?

Maintaining your above-ground Coleman pool is essential to keep it in proper working condition. Below are some of the essential maintenance that should be done, and they include the following:

Installing a sump pump: you should install a sump pump in your home if you have an above-ground pool such that if there are any leakages, the pump will prevent all types of water damage and the growth of mildews and hazardous mold.

Use a solar blanket: The blanket will protect your pool from debris and rain. It will also heat your pool using solar energy while reducing evaporation. The blanket can reduce thermal loss, saving you money on energy costs.

Test your pool’s chlorine level: Chlorine is vital for the water in your pool because it kills harmful bacteria, algae, and other microorganisms. However, when exposed to things such as the sun, sweat, and chemicals, chlorine breaks down.

The normal chlorine level in your pool should be between two and four parts per million (ppm). Therefore, always test the level of chlorine in your pool to ensure that it is within the normal range.

Vacuum your pool often: Your pool has to be cleaned regularly because not even the best filtration system will remove all the debris from it. Vacuuming will keep your pool water clear, help prevent the growth of algae, and allow chemicals like chlorine to work better.

Do weekly shock treatment: The weekly shock treatment involves the use of a powdered form of chlorine to kill bacteria, algae, and other contaminants. The weekly treatment will oxidize contaminants and free up chlorine, allowing it to work on cleaning the pool water.

Clean and replace the filter regularly: Fitters work to capture debris that can pollute and cloud your pool. However, the pool filters need to be cleaned once a week by removing and hosing down the cartridge. It is also important to replace the filter whenever required.

Test the pH level of your pool water: The pH level of your pool water should be tested and maintained to keep the water clear. If the pH levels are outside the range of 7.2 to 7.6, it will reduce the effectiveness of the chemicals added to your pool to clear contaminants and bacteria.

Clean out the skimmer basket and pumps regularly: A pump basket is responsible for collecting debris before it reaches the pump, while the skimmer pulls water in from the pool’s surface. The skimmer captures debris in the basket before it enters the filtration system.

The pump and skimmer baskets need to be cleaned once a week. Make sure the heater and pool pump are turned off before cleaning out the baskets.

Run the pump on your pool for at least eight hours a day: The pump of your pool keeps the water in your pool circulating which is essential because moving water leaves no room for algae to grow. It also keeps your pool water clear because it directs debris into the filter.


How to Vacuum Coleman Pool with a Sand Filter