2 Superb Methods of Unclogging your Vacuum Cleaner Hose

Vacuum cleaners are essential tools for maintaining a clean home, but a clogged hose can be a real hassle. Fear not! In this blog post, we’ll explore some superb methods to unclog your vacuum cleaner hose quickly and efficiently. Say goodbye to frustration and hello to hassle-free vacuuming! Let’s dive in and discover how to keep your vacuum running smoothly.

In this post we will cover:

  1. How to know if your Vacuum Hose is clogged
  2. How to Unclog your Vacuum Hose: A Step by Step Guide
  3. How do I keep my vacuum cleaner working as new?
  4. What are the Things That I Should Never Vacuum with my Vacuum Cleaner?
  5. How do I use the attachments of my vacuum cleaner?

How to know if your Vacuum Hose is clogged

There are several simple and straightforward methods for determining whether or not your vacuum hose is clogged. The first is when you notice your vacuum is not picking up as much waste as it used to. That means the suction power has decreased.

The second is when the problem of low suction persists even after cleaning and replacing the vacuum filter and bag. The third situation is when your vacuum’s attachment lacks suction. That indicates a clog in your vacuum’s suction port.

Clogging of a vacuum hose can be avoided by picking up large debris in your home before using your vacuum to clean. Use attachments because they are narrower than the hose and thus less likely to clog.

Vacuum what you see, including looking under furniture and beds, to ensure there is nothing that can clog your vacuum hose.


Unclogging your Vacuum Cleaner Hose: A Step by Step Guide

Method 1: Removing & Cleaning the Hose

1. Detach your vacuum hose from the vacuum cleaner. You will be able to spot the outer hose that attaches the roller at the bottom of the machine to the unit’s bag.

Remove one edge of your vacuum hose from the base of the unit and then the other edge from the prime surface.

2. If your vacuum hose is screwed onto the vacuum, make sure that you have unscrewed it before detaching the hose from the machine.

3. Place the vacuum hose on any flat surface nearest to you after removing it from the vacuum.

4. Unplug the vacuum cleaner before undertaking any maintenance operation to prevent electric shocks of any kind.

5. Remove any big clogs from the vacuum hose using a household broomstick. Insert one end of the stick inside the vacuum hose, then slowly insert the broomstick to prevent any unnecessary puncturing or damage to the hose.

The broomstick will push any present big clogs out of the vacuum hose through the other side.

6. If your vacuum hose is translucent, keep it up to a certain amount of light so that you can see through it and identify the location of the clogs. If this is not working, try peeking through one end of the hose.

7. Avoid using sharp objects such as closet hangers as they impact the vacuum’s suction power when they are pushed through the vacuum hose.

8. You can apply baking soda and vinegar to remove any matter that has accumulated inside the vacuum hose. Fill the hose with half a cup of baking soda, after placing your vacuum hose in the sink.

Give the hose a good shake so that the interior is properly coated with the baking soda.

9. After that, you can pour half a cup of white vinegar gradually into the hose. Allow the vinegar and baking soda to bubble for a few minutes within the vacuum hose so that it can break up the buildup inside.

If you do not have vinegar or baking soda, you can instead use a powdered laundry detergent and hot water.

10. After a few minutes have passed, thoroughly rinse the vacuum hose with hot water. Wash the hose with water to remove any remaining vinegar or baking soda. Ensure that water is poured on both ends of the hose to make it completely clean.

If you cannot direct your sink to the hose, you can soak the hose in a sink filled with water.

11. Leave the hose to dry before reattaching it to the vacuum. Place the hose in a manner such that both ends face the ground and leave it in that position for an hour. When the vacuum hose is fully dry, attach it back to your vacuum.


Method 2: Pulling Out a Clog in the Bottom Hose

1. Disconnect the primary hose of the vacuum that attaches near the base of the roller and the main body of the vacuum. Accessing the bottom hose will require you to unscrew or remove it from all spots.

Make sure that your vacuum is unplugged before you start any work on it.

2. Unscrew the bottom hose from the vacuum’s body to remove it. The bottom hose is attached to the base of the vacuum and it is the spot where the primary hose connects to the unit.

Find the screw that holds the bottom hose in position and remove it using a screwdriver. Put the screw in a safe place so that it is not misplaced. Some bottom hoses are clipped to the vacuum. Remove the hose from the clip in this case.

3. Once the hose has been removed, pull the clog out using a set of needle-nose pliers. Insert the pair of pliers into the ends of the bottom hose and once you sense the clog, pinch it with the pliers to get a good grip. Grab it and remove it from the hose.

4. After this, reconnect the vacuum hose back into the unit and screw it so that it is held against the body of the machine. Keep the main hose in its place and attach it properly.


FAQs

How do I keep my vacuum cleaner working as new?

1. If your vacuum is a bagged one, regularly check the bag and dispose of its contents whenever it is full. When the bag is full, the vacuum becomes less efficient.

2. If you have a bagless vacuum cleaner, ensure that the dust cup is empty before you use it.

4. Rinse out the removable bin regularly to prevent debris and dirt from building up in the container and becoming stuck on the inside.

5. Clean the vacuum, including the vent covers. A vacuum has several covered vents that allow small particles such as dirt and dust to move through, but stop objects that are large.

6. Clean or replace the filter or filters of your vacuum. The filter traps fine dust in its fibers and over time, they collect a lot of dust.

7. Removing debris from the roller. The brush roller comes into contact with the surface that you are cleaning and helps in collecting debris and dirt.


Things That I Should Never Vacuum with my Vacuum Cleaner?

1. Large glass pieces: Glass shards can become dislodged in the hose, puncture the bag, or scratch the interior of the hose, endangering your vacuum. Instead, sweep these large glass pieces with a broom.

2. Paperclips, coins, and other small items: When you see these types of dirt on your floor, you may be tempted to vacuum over them with your vacuum.

They can, however, become entangled in the rotating brush or even break off the plastic pieces that are contained within the unit.

3. Fine dust: Vacuuming up sanding residue or other small particles should be avoided because they require a more durable unit, such as a shop vac. Fine dust quickly clogs the dirtbag or filters, causing your machine to release dirt back into the air.

4. Fireplace ashes: Ashes from the fireplace trap fine particles and heat. For this reason, do not use your regular vacuum to suck them up. It is advisable to let the ashes cool for at least four days, then clear the area using a wet and dry vacuum or a utility.

5. Wet food and other moist things: The normal vacuum has not been designed to pick up wet things, whether it is a portion of wet dog food, soggy cereal, or a spill. For such messes, use a wet and dry vacuum or a paper towel.


How do I use the attachments of my vacuum cleaner?

1. Crevice tool: the skinny-shaped tool is great for accessing corners and other tight spots in your home. You should use this tool around radiators, baseboards, between sofa cushions, and in the vents.

It can also be utilized to delint the dryer, clean the coils of the refrigerator, spaces between car seats, and other places your vacuum hose cannot fit.

2. Extension wand: the wand enables you to reach places such as light fixtures, high ceilings, and corners. You can also use it behind large appliances without moving them.

Simply wrap some pantyhose around the nozzle and secure it with a rubber band. Put the wand over the item you cannot reach and it will be sucked into the vacuum’s hose.

3. Dusting brush: the brush is round and has soft, long bristles. It is excellent at dusting bookcases, window sills, lampshades, blinds, frame pictures, and wooden surfaces. You can also dust door moldings and light fixtures with the brush.

4. Upholstery tool: this is a small tool that has a flat head, and its bristles are stiff to assist you in removing lint, dust, and fur from cushions, chairs, mattresses, and sofas.


The Wind-Up

In wrapping up our exploration of effective techniques for clearing your vacuum cleaner hose, it’s evident that simple methods can solve pesky clogs without hassle.

By employing everyday tools like wire hangers, broom handles, or even a gentle burst of compressed air, you can swiftly restore your vacuum’s suction power.

With these tricks in your cleaning arsenal, maintaining a clear hose becomes a breeze, ensuring efficient cleaning for years to come.